Survey of dioxin sources in the Baltic Region (extended summary)

The present paper summarises the results of the project: 'Survey of Anthropogenic Sources of Dioxins and Furans in the Baltic Region'. As a part of the project, inventories have been carried out in Estonia, Latvia, Lithuania and Poland by applying the toolkit for quantification of dioxin and furan releases developed by UNEP Chemicals. The main route of direct releases to the environment is emission to air. Total emission to air from Poland was estimated at 490 (88-1,300) g I-TEQ/year, whereas the emissions from Estonia, Latvia and Lithuania were estimated as being 14 (2.4-54), 23 (2.6-63) and 17 (2.6-38) g I-TEQ, respectively. In general, the uncertainty on the estimates is very high, and recommendations regarding further development of the inventories have been made, and measures for reducing the releases have been provided.     

Release and fate of fluorocarbons in a shredder residue landfill cell: 2. Field investigations

The shredder residues from automobiles, home appliances and other metal containing products are often disposed in landfills, as recycling technologies for these materials are not common in many countries. Shredder waste contains rigid and soft foams from cushions and insulation panels blown with fluorocarbons. The objective of this study was to determine the gas composition, attenuation, and emission of fluorocarbons in a monofill shredder residue landfill cell by field investigation. Landfill gas generated within the shredder waste primarily consisted of CH₄ (27%) and N₂ (71%), without CO₂, indicating that the gas composition was governed by chemical reactions in combination with anaerobic microbial reactions. The gas generated also contained different fluorocarbons (up to 27 μg L^?1). The presence of HCFC-21 and HCFC-31 indicated that anaerobic degradation of CFC-11 occurred in the landfill cell, as neither of these compounds has been produced for industrial applications. This study demonstrates that a landfill cell containing shredder waste has a potential for attenuating CFC-11 released from polyurethane (PUR) insulation foam in the cell via aerobic and anaerobic biodegradation processes. In deeper, anaerobic zones of the cell, reductive dechlorination of CFCs to HCFCs was evident, while in the shallow, oxic zones, there was a high potential for biooxidation of both methane and lesser chlorinated fluorocarbons. These findings correlated well with both laboratory results (presented in a companion paper) and surface emission measurements that, with the exception from a few hot spots, indicated that surface emissions were negative or below detection.     

Release and fate of fluorocarbons in a shredder residue landfill cell: 1. Laboratory experiments

The shredder residues from automobiles, home appliances and other metal-containing products are often disposed in landfills, as recycling technologies for these materials are not common in many countries. Shredder waste contains rigid and soft foams from cushions and insulation panels blown with fluorocarbons. The objective of this study was to use laboratory experiments to estimate fluorocarbon release and attenuation processes in a monofill shredder residue (SR) landfill cell. Waste from the open SR landfill cell at the AV Miljø landfill in Denmark was sampled at three locations. The waste contained 1–3% metal and a relatively low fraction of rigid polyurethane (PUR) foam particles. The PUR waste contained less blowing agent (CFC-11) than predicted from a release model. However, CFC-11 was steadily released in an aerobic bench scale experiment. Anaerobic waste incubation bench tests showed that SRSR produced significant methane (CH₄), but at rates that were in the low end of the range observed for municipal solid waste. Aerobic and anaerobic batch experiments showed that processes in SRSR potentially can attenuate the fluorocarbons released from the SRSR itself: CFC-11 is degraded under anaerobic conditions with the formation of degradation products, which are being degraded under CH₄ oxidation conditions prevailing in the upper layers of the SR.     

Addressing the challenges of tetracycline analysis in soil: extraction, clean-up, and matrix effects in LC-MS

An optimized extraction and clean-up method for the analysis of chlortetracycline, doxycycline, oxytetracycline, and tetracycline antibiotics in soil is presented in this work. Soil extraction using different solvents was performed, but the use of a 50 : 50 (v/v) methanol : acetate buffer (pH 8) solvent mixture in a pressurized liquid extraction (PLE) system proved to give the best extraction efficiency and reproducibility. The effect of soil composition on the PLE extraction efficiency was also examined, and results indicated that recovery data for one soil is not necessarily consistent with other soil types containing different compositions of clay and organic matter content. The percent recoveries of the optimized PLE method varied between the soils and ranged from 22-99%, depending on soil type, and more specifically clay content. In addition, the extent of ionization suppression caused by co-extracted humic acids was examined in an ion trap mass spectrometer (MS), and a single quadrupole MS. It was found that under positive electrospray ionization, the single quadrupole MS was less susceptible to ionization suppression than the ion trap MS. Therefore, various sample clean-up procedures were evaluated to selectively reduce the amount of co-extracted humic acids in the soil extracts. The most effective clean-up was obtained from the use of StrataX sorbent in combination with a strong anion exchange cartridge.     

High-resolution spatial distribution and associated uncertainties of greenhouse gas emissions from the agricultural sector

Mitigation and Adaptation Strategies for Global Change - Agricultural activity plays a significant role in the atmospheric carbon balance as a source and sink of greenhouse gases (GHGs) and has...     

Improving collaboration in the implementation of global biodiversity conventions

Eight conventions make up the biodiversity cluster of multilateral environmental agreements (MEAs) that provide the critical international legal framework for the conservation and sustainable use of nature. However, concerns about the rate of implementation of the conventions at the national level have triggered discussions about the effectiveness of these MEAs in halting the loss of biodiversity. Two main concerns have emerged: lack of capacity and resources and lack of coherence in implementing multiple conventions. We focused on the latter and considered the mechanisms by which international conventions are translated into national policy. Specifically, we examined how the Strategic Plan for Biodiversity 2011–2020 and the associated Aichi Biodiversity Targets have functioned as a unifying grand plan for biodiversity conservation. This strategic plan has been used to coordinate and align targets to promote and enable more effective implementation across all biodiversity-related conventions. Results of a survey of 139 key stakeholders from 88 countries suggests streamlining across ministries and agencies, improved coordination mechanisms with all relevant stakeholders, and better knowledge sharing between conventions could improve cooperation among biodiversity-related conventions. The roadmap for improving synergies among conventions agreed to at the 13th Convention on Biological Diversity's Conference of Parties in 2016 includes actions such as mechanisms to avoid duplication in national reporting and monitoring on conventions and capacity building related to information and knowledge sharing. We suggest the scientific community can actively engage and contribute to the policy process by establishing a science-policy platform to address knowledge gaps; improving data gathering, reporting, and monitoring; developing indicators that adequately support implementation of national plans and strategies; and providing evidence-based recommendations to policy makers. The latter will be particularly important as 2020 approaches and work to develop a new biodiversity agenda for the next decade is beginning.     

The importance of Indigenous Peoples’ lands for the conservation of terrestrial mammals

Indigenous Peoples’ lands cover over one-quarter of Earth's surface, a significant proportion of which is still free from industrial-level human impacts. As a result, Indigenous Peoples and their lands are crucial for the long-term persistence of Earth's biodiversity and ecosystem services. Yet, information on species composition on these lands globally remains largely unknown. We conducted the first comprehensive analysis of terrestrial mammal composition across mapped Indigenous lands based on data on area of habitat (AOH) for 4460 mammal species assessed by the International Union for Conservation of Nature. We overlaid each species’ AOH on a current map of Indigenous lands and found that 2695 species (60% of assessed mammals) had ≥10% of their ranges on Indigenous Peoples’ lands and 1009 species (23%) had >50% of their ranges on these lands. For threatened species, 473 (47%) occurred on Indigenous lands with 26% having >50% of their habitat on these lands. We also found that 935 mammal species (131 categorized as threatened) had ≥ 10% of their range on Indigenous Peoples’ lands that had low human pressure. Our results show how important Indigenous Peoples’ lands are to the successful implementation of conservation and sustainable development agendas worldwide.